Mid-volume UV flatbed printer
6-channel piezoelectric inkjet system with two 636-nozzle, variable droplet printhead per channel.
CMYK WW, or
CMYK WV, or
CMYK cm, or
piezoelectric inkjet system with variable droplet printheads
Variable droplet sizes from 6 to 42 picolitres. The ability to vary the drop size to 6 picolitres produces sharp images with smoother gradients and quartertones. The ability to jet larger droplets up to 42 picolitres produces uniform colors. The result is near-photographic quality with sharpness only before seen at resolutions of 1,440 dpi or higher. Text as small as 2 pt. is perfectly legible (with High Definition mode).
IJC255 or IJC257 UV-curable inks packed in quick-change, 3 litre bags for: Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta. White and Varnish packed in 1 litre bags.
True flatbed for rigid media printing with available Roll Media Option for flexible media printing
125 x 250 cm
Up to: 126 x 251 cm (for edge-to-edge printing)
Up to 34 kg/m²
90 to 220 cm, Up to 50 kg (at any width), Maximum diameter: 240 mm, Core: 3 inches (inside), Bias: Print-side-in or print-side-out, Most types (application dependent)
The AMS (Automatic Printhead Maintenance System) enables quick, reliable and hands-free cleaning of a single colour in less than 25 sec or all colours in 2 to 4 min (depends on the printer version).
5 pneumatic operated pins
60 x 80 cm (min) to 125 x 250 cm (max)
±0.8 mm max error, measured over 2.5 m
±0.4 mm max error, measured over 1.25 m
0.7 mm max error, measured over 2.5 m
0.5 mm max error, measured over 1.25 m
1.0 mm max error, measured over 2.5 m x 1.25 m
±0.6 mm max error, measured over 2.19 m
±1.5 mm max error, measured over 2.0 m
0.7 mm max error, measured over 2.19 m
2.0 mm max error, measured over 2.0 m
2.5 mm max error, measured over 2.0 m x 2.19 m
ONYX® Thrive™ (421 configuration or greater recommended)
ONYX® ProductionHouse™ (available, not recommended)
2 X 200-240 VAC, 50/60 Hz, Single-phase, Rated Current: 16A, Circuit Breakers Europe: 16A
Clean, dry, compressed air using a Coalescing Filter, Pressure Regulator set to 690 kPa (100 psi) and 6 mm outside diameter air tubing. Peak flow: 56 l/min at 690 kPa
Temperature: 18 to 30 ˚C
Relative humidity: 30 to 70% (non-condensing)
Ventilation: 1,200 m³ per hour minimum (see Site Preparation Guide)
2,750 m maximum, however some components specify a limit of 2,000 m
Printer only: 5.0 m x 2.0 m, 825 kg
Printer + Roll Media Option: 5.0 m x 2.3 m, 1,000 kg
Table height: 0.88 m / Overall height: 1.3 m
Visit our online guide to find the right media for your printer and application, including matching color profiles
Add 2 ink channels to the printer at any time
Application of the 2-Channel Upgrade converts an Arizona 2260 GT to Arizona 2280 GT adding Light Cyan and Light Magenta for near photo quality and fine-art printing or converts an Arizona 2260 L GT to Arizona 2280 GT adding White ink and/or Varnish capacity for backlit and non-white media applications.